COMBINATION MACHINE MODEL HQ800

Combination Lathe, Milling, Drilling with 2 motors 550W

COD: DMTFF05	PREZZO DI LISTINO: ~~2.556,00~~ - PROMO: 1.966,00 €
Zoom	DESCRIPTION HQ800 is a metal lathe with mill drill and can be used for accurate turning, drilling and milling. With a heavy-duty, cast iron structure and metal finish this machine is a reliable and accurate metal lathe An automatic feed in both direction (Cross and longitudinal) make this an extremely versatile machine to turn, mill and thread. The basic model is supplied with 2 independently 550W in single phase motor. The machine is supplied with a selfcentering 3 jaw chuck, 2 dead centre with conical attack, 2 rest and metal stand.

COD: DMTFF05

PREZZO DI LISTINO: ~~2.556,00~~ - PROMO: 1.966,00 €

Zoom

DESCRIPTION

HQ800 is a metal lathe with mill drill and can be used for accurate turning, drilling and milling. With a heavy-duty, cast iron structure and metal finish this machine is a reliable and accurate metal lathe
An automatic feed in both direction (Cross and longitudinal) make this an extremely versatile machine to turn, mill and thread.
The basic model is supplied with 2 independently 550W in single phase motor.
The machine is supplied with a selfcentering 3 jaw chuck, 2 dead centre with conical attack, 2 rest and metal stand.

PRODUCT DETAILS
DIMENSION LATHE
Dimensions with stand	1600(L) x 580(W) x 1700(H)
Dimensions without stand	1600(L) x 580(W) x 1000(H)
Net weight	325 Kg
METAL LATHE
Distance between center	800 mm
Center height	210 mm
Max swing over the bed	420 mm
Chuck diameter	130 mm
Spindle Bore	28 mm
Range of spindle speeds	160 to 1360 rpm (7 adjust speed)
Metric thread	0,2 mm to 6 mm
Inch thread	4 to120 TPI
Longitudinal travel	740 mm
Cross travel	200 mm
Tail stock taper	MT3
Spindle taper	MT4
Powerful motor	550 W
Voltage	1 Phase(220 V)
MILL DRILL
Spindle taper	MT3
Spindle travel	110 mm
Spindle speeds	120 to 3000 rpm
Max drilling capacity	22 mm
Head tilt	360°
Table size	475 mm x 160 mm
Powerful motor	550 W
Voltage motor	1 Phase (220 V)
FEED
Longitudinal Feed	Automatic in both direction
Cross Feed	Automatic in both direction

ACCESSORY ON DEMAND

	Faceplate diam. 200 mm	28,00 €
	(Cod: DMACTF31)
	Purchased with the lathe: 22,00 €

	6 point metal turning set 10 mm	35,00€
	(Cod: DMACTF377)
	Purchased with the lathe: 30,00€

	6 point metal turning set 12 mm	52,00€
	(Cod: DMACTF189)
	Purchased with the lathe: 42,00€

	Live center chuck - cono MT3	50,00€
	(Cod: DMACTF14)
	Purchased with the lathe: 45,00€

	Mill cutter - MT3	55,00 €
	(Cod: DMACTF26)
	Purchased with the lathe: 45,00 €

	Live center chuck - Taper CM3	75,00 €
	(Cod: DMACTF87)
	Purchased with the lathe: 64,00 €

	Contropunta con mandrino autoserrante cono MT3	88,00 €
	(Cod: DMACTF187)
	Purchased with the lathe: 75,00 €

	Quick changetool post mod. Quadra A	190,00 €
	(Cod: DMACT02)
	Purchased with the lathe: 160,00 €

	Milling chuck with 8 collets MT3	130,00 €
	(Cod: DMACTF17)
	Purchased with the lathe: 100,00 €

	Mandrino a 3 + 3 pinze autocentranti diametro 130 mm (3 INTERNE + 3 ESTERNE)	160,00 €
	(Cod: DMACTF194)
	Purchased with the lathe: 130,00 €

	4-Jaw chuck indipendent Ø 160 mm	160,00 €
	(Cod: DMACTF10)
	Purchased with the lathe: 130,00 €

	4-Jaw chuck autocentranti Ø 160 mm	160,00 €
	(Cod: DMACTF205)
	Purchased with the lathe: 130,00 €

	N. 3 soft jaws for chucks with 3 self-centering clamps Ø 130	53,00 €
	(Cod: DMACTF213)
	Purchased with the lathe: 42,00 €

	Kit di 2 Steady rest (central and lateral) for metal lathe	100,00 €
	(Cod: DMACTF34)
	Purchased with the lathe: 80,00 €