Lathe Milling Machine AT300
Lathe milling machine with 1 motor 750 W single phase
| COD: DMTFF07 |
List price: |
|---|---|
Zoom |
Description
It 'a combined machine suitable for milling and turning. The lathe has automatic feed suitable for threading. The engine that powers both the lathe and milling machine is a powerful 750 W single phase. The machine is already provided in the standard configuration with the base, lunettes No. 2, No. 2 tailstock with fixed mount type conical, all gear sets capable of threading, the spindle of the lathe with 3 clamps and chuck milling machine |
TECNICAL SHEET |
|
| MACHINE DIMENSIONS | |
| Dimensions with stand | 1150 mm (Length) x 500 mm (width) x 1580 mm (height) |
| Dimensions without stand | 1100 mm (Length) x 500 mm (width) x 900 mm (height) |
| Net weight | 275 Kg |
| LATHE | |
| Distance between the points | 500 mm |
| Height of the points | 155 mm |
| Maximum diameter of the workpiece on the bench | 300 mm |
| Bar diameter through | 26 mm |
| Diameter of the spindle (supplied) | 130 mm |
| Spindle speed | From 160 to 1600 rpm |
| Metric thread | From 0,5 mm to 3 mm |
| Threads in inches | From 11 to 40 threads per inch |
| Longitudinal travel of the trolley | 170 mm |
| Cross travel of the trolley | 75 mm |
| Cone tailstock | CM3 |
| Spindle bore | CM4 |
| MILLING | |
| Cone tree cutter | CM3 |
| Diameter of the TBM | 80 mm |
| Speed milling | From 125 to 1600 RPM |
| Angle milling head | 360° |
| Plan milling | 200 mm x 150 mm |
| MOTOR | |
| Power | 750 W |
| Type | Single Phase (220 V) |
ACCESSORY ON DEMAND
 |
Plateau wheel diameter 200 mm |
28,00 € |
| (Cod: DMACTF31) |
||
| Purchased with the lathe: 22,00 € |
 |
Basic tool kit for lathes 10 mm | 35,00€ |
| (Cod: DMACTF377) |
||
| Purchased with the lathe: 30,00€ |
 |
Tool kit for lathes 12 mm | 52,00€ |
| (Cod: DMACTF189) |
||
| Purchased with the lathe: 42,00€ |
 |
Rotating tailstock bearing conical nut MT3 |
50,00€ |
| (Cod: DMACTF14) |
||
| Purchased with the lathe: 45,00€ |
 |
Face milling-cutter with 3 blades with taper MT3 attack |
55,00 € |
| (Cod: DMACTF26) |
||
| Purchased with the lathe: 45,00 € |
 |
Tailstock spindle taper MT3 |
75,00€ |
| (Cod: DMACTF87) |
||
| Purchased with the lathe: 64,00€ |
 |
Contropunta con mandrino autoserrante cono MT3 |
88,00€ |
| (Cod: DMACTF187) |
||
| Purchased with the lathe: 75,00€ |
 |
Mandrino a 3 + 3 pinze autocentranti diametro 130 mm (3 INTERNE + 3 ESTERNE) |
160,00 € |
| (Cod: DMACTF199) |
||
| Purchased with the lathe: 130,00 € |
 |
4 clamps independent chuck for lathe diameter 160 mm |
160,00 € |
| (Cod: DMACTF32) |
||
| Purchased with the lathe: 130,00 € |
|
4 clamps self centering chuck for lathe diameter 160 mm |
160,00 € |
| (Cod: DMACTF205) |
||
| Purchased with the lathe: 130,00 € |
 |
Kit 8 milling cutter pliers + a spindle clamps MT3 |
130,00 € |
| (Cod: DMACTF17) |
||
Purchased with the lathe: 100,00 € |
 |
Milling Vises 100 mm |
130,00 € |
| (Cod: DMACTF55) |
||
| Purchased with the lathe: 117,00 € |
 |
Quick-change turret square base quadra A |
190,00 € |
| (Cod: DMACT02) |
||
| Purchased with the lathe: 160,00 € |
|
Quick-change turret quadra E |
205,00 € |
| (Cod: DMACTF347) |
||
| Purchased with the lathe: 175,00 € |
 |
Soft jaws selfcentering Ø 130 mm |
53,00 € |
| (Cod: DMACTF212) |
||
| Purchased with the lathe: 42,00 € |
|
Soft jaws selfcentering Ø 130 mm |
53,00 € |
| (Cod: DMACTF212S) |
||
| Purchased with the lathe: 42,00 € |
 |
N. 3 soft jaws for chucks with 3 self-centering clamps Ø 130 |
53,00 € |
| (Cod: DMACTF213) |
||
| Purchased with the lathe: 42,00 € |
 |
Kit di n. 2 lunette (centrale e laterale) per tornio ferro |
100,00 € |
| (Cod: DMACTF28) |
||
| Purchased with the lathe: 80,00 € |