METALWORKING COMBINATION MACHINE AT750
Drilling Lathe and Milling Machine: Lathe 300 x 750 mm and Milling Machine with Spindle speeds from 125 to 1600 rpm
| COD: DMTFF10 |
List price: |
|---|---|
|
|
Description
AT720 is an accurate metal lathe with mill drill and can be used for turning, drilling and milling.
Metal lathe AT750 is bigger than AT520 because the distance between center is 750 mm.
An automatic feed in both direction (Cross and longitudinal) make this an extremely versatile machine to turn and mill.
|
TECHNICAL SPECIFICATION |
|
| DIMENSIONS | |
| Dimensions with stand | 1150(L) x 500(W) x 1680(H) mm |
| Dimensions without stand | 1100(L) x 500(W) x 900(H) mm |
| Net weight | 275 Kg |
| METAL LATHE | |
| Distance between centers | 750 mm |
| Centre Height | 155 mm |
| Max swing over the bed | 300 mm |
| Chuck diameter | 130 mm |
| Spindle Bore | 26 mm |
| Range of spindle speeds | 160 to 1600 rpm |
| Metric thread | 0,5 mm to 3 mm |
| Inch thread | 11 to 40 TPI |
| Longitudinal travel | 170 mm |
| Cross travel | 75 mm |
| Tail stock taper | CM3 |
| Spindle taper | CM4 |
| Powerful motor | 750 W |
| Voltage motor | 1 Phase (220 V) |
| Milling and Drilling | |
| Spindle taper | CM3 |
| Spindle dia. | 80 mm |
| Spindle speeds | Da 125 a 1600 rpm |
| Head tilt | 360° |
| Table size | 200 mm x 150 mm |
| Powerful motor | 750 W |
| Voltage motor | 1 Phase (220 V) |
| FEED | |
| Longitudinal feeds | Automatic in both direction |
| Cross feeds | Automatic in both direction |
ACCESSORY ON DEMAND
 |
Faceplate Ø 200 mm |
28,00 € |
| (Cod: DMACTF31) |
||
| Buy one metal lathe and get it for just: 22,00 € |
 |
6 point metal turning set 10 mm | 35,00€ |
| (Cod: DMACTF377) |
||
| Buy one metal lathe and get it for just: 30,00€ |
 |
Set 6 tool for working the iron 12 mm | 82,00€ |
| (Cod: DMACTF189) |
||
| Buy one metal lathe and get it for just: 73,00€ |
 |
Live center - 3MT | 50,00€ |
| (Cod: DMACTF14) |
||
| Buy one metal lathe and get it for just: 45,00€ |
 |
Mill cutter – 3MT |
55,00 € |
| (Cod: DMACTF26) |
||
| Buy one metal lathe and get it for just: 45,00 € |
 |
Live center chuck - Taper MT3 |
75,00 € |
| (Cod: DMACTF87) |
||
| Buy one metal lathe and get it for just: 64,00 € |
 |
Contropunta con mandrino autoserrante cono MT3 |
88,00 € |
| (Cod: DMACTF187) |
||
| Buy one metal lathe and get it for just: 75,00 € |
 |
Clamp with fixed jaw 100 mm |
130,00 € |
| (Cod: DMACTF55) |
||
| Buy one metal lathe and get it for just: 117,00 € |
 |
Milling chuck with 8 collets - (4-5-6-8-10-12-14-16 mm) |
130,00 € |
| (Cod: DMACTF17) |
||
| Buy one metal lathe and get it for just: 120,00 € |
 |
4 jaw chuck independent Ø 160 mm |
160,00 € |
| (Cod: DMACTF32) |
||
| Buy one metal lathe and get it for just: 130,00 € |
|
4 jaw chuck self centering Ø 160 mm |
160,00 € |
| (Cod: DMACTF205) |
||
| Buy one metal lathe and get it for just: 130,00 € |
 |
Mandrino a 3 + 3 pinze autocentranti diametro 130 mm (3 INTERNE + 3 ESTERNE) |
160,00 € |
| (Cod: DMACTF199) |
||
| Acquistandolo unitamente ad un tornio: 130,00 € |
 |
Quick change tool post quadra A |
190,00 € |
| (Cod: DMACT02) |
||
| Buy one metal lathe and get it for just: 160,00 € |
 |
Quick change tool post quadra E |
205,00 € |
| (Cod: DMACTF347) |
||
| Buy one metal lathe and get it for just: 175,00 € |
 |
Soft jaws internal selfcentering Ø 130 mm |
53,00 € |
| (Cod: DMACTF212) |
||
| Buy one metal lathe and get it for just: 42,00 € |
|
Soft jaws external selfcentering Ø 130 mm |
53,00 € |
| (Cod: DMACTF212S) |
||
| Buy one metal lathe and get it for just: 42,00 € |
 |
N. 3 soft jaws for chucks with 3 self-centering clamps Ø 130 |
53,00 € |
| (Cod: DMACTF213) |
||
| Buy one metal lathe and get it for just: 42,00 € |
 |
Kit di 2 Steady rest (central and lateral) for metal lathe |
100,00 € |
| (Cod: DMACTF28) |
||
| Buy one metal lathe and get it for just: 80,00 € |